Blending processes are one of the key manufacturing steps in pharmaceutical preparation, as optimal blend homogeneity is crucial to ensure correct dosage. Driven by the Process Analytical Technology (PAT) initiative, spectroscopic techniques like near-infrared (NIR) and Raman spectroscopy are implemented for online monitoring and process control [1,2]. Thereby the traditional offline approach, controlling the mixing end-point using HPLC or UV-VIS spectroscopic methods can be bypassed.
Here, NIR and Raman spectroscopy were used to evaluate the homogeneity of a binary powder blend consisting of acetyl salicylic acid (ASA) and lactose monohydrate (LM) during the blending process.
Schematic illustration (left) and photo (right) of the experimental setup, showing a circular mixer with a four plate impeller. The mixer was subsequently filled with either component A or B on top. The fiber optical reflection probe was positioned with direct contact to the powder during the blending process. For our measurements we used the PerkinElmer spectrometers Spectrum 400 FT-NIR and RamanStation 400F.
Online Monitoring by NIR
Online Monitoring by Raman
- NIR and Raman spectroscopy proved to be suitable for quantitative online monitoring of powder blending processes.
- Monitoring pharmaceutical operations involving solid samples, NIR and Raman applications are limited by mixture sub sampling. A multiple sample-point approach would increase the robustness of the prediction.
- Raman spectroscopy requires longer integration times to reduce the noise level compared to NIR spectroscopy, hence monitoring by Raman spectroscopy is limited to slow alternating processes.
- Depending on the powder loading order and volume, different blender specific mixing kinetics were identified.
K1 Competence Center - Initiated by the Federal Ministry of Transport, Innovation & Technology (BMVIT) and the Federal Ministry of Economics & Labour (BMWA). Funded by FFG, Land Steiermark and Steirische Wirtschaftsförderung (SFG)
 Berntsson O., Danielsson L.-G., Lagerholm B. and Folestad S., 2002, Powder Technology 123, 185 -193
 Sekulic S., Ward H., Brannegan D., Stanley E., Evans C., Sciavolino S., Hailey P. and Aldridge P., 1996, Anal. Chem. 68, 509-513
 Blanco M., Romero M. and Alcala M., 2004, Talanta 64, 597-602