Interested in linking to "Testing Your Metal: Best Practices from PTI"?
You may use the Headline, Deck, Byline and URL of this article on your Web site. To link to this article, select and copy the HTML code below and paste it on your own Web site.
By Paul Thomas, Senior Editor
With plenty of viable, affordable metal detection technologies on the market (see below), you’d think that metals contamination would be one problem drug manufacturers would have mastered. Not so, according to recent FDA warnings that show many manufacturers of powder, solid, or liquid products continue to be mystified by metal, as well as other particulates. Here are three snippets from recent letters:
Clearly there is some negligence going on. Good metal detection “is fairly easy to achieve,” says Bill Leonard, engineering manager at contract manufacturer and packager Pharma Tech Industries (Royston, Georgia). “But sometimes it can be cost prohibitive, requiring additional capital, or you can be tight on space to fit an extra piece of equipment in.” In addition, Leonard says, some companies may receive certification from suppliers that materials are metals-free and thus assume that the packaged product is free as well.
However, as Leonard is quick to point out, the capital expense more than pays for itself the first time a foreign particulate is detected. Pharma Tech requires various metal detection applications at its Georgia facility, where there are three high-speed bottle-filling lines, three pouching lines, as well as three packaging lines serving four tabletting machines. (For the record, PTI also has operations for blending and for bottle and medical device molding.)
Over the years, Pharma Tech has purchased metal detection equipment from different vendors, all of which have done their job admirably, Leonard says. Most recently, the facility added an x-ray inspection machine from Mettler-Toledo Safeline (photo) to one of the pouching lines, per the request of a customer. The powder product is packaged in a metalized film pouch, which precluded the use of a traditional metal detector but was no problem for x-ray.
In addition to identifying metals, X-ray detectors also track plastic, glass and other contaminants, and can be used to verify dosing portions and package integrity as well. Vendors such as Mettler-Toledo Safeline, Eriez, Thermo Fisher Scientific, and others offer a variety of shapes and sizes for various applications—from hand-helds to cabinets for large packages.
X-ray has, more than anything, given PTI peace of mind. The pouching line equipment has yet to detect any particulates since implementation, and has only a handful of times rejected product, which Leonard attributes to either system noise or perhaps a particulate that may have appeared on the outside of the pouch packages. The reject mechanism—a blast of air that removes a dummy pouch from the line—is tested at the start of each production day.
Leonard is experimenting with x-ray for mass measurement in pouching, where speed become paramount. Pharma Tech’s pouchers process approximately 80 to 90 units per minute, which can create accuracy problems for traditional checkweighers on tight-tolerance Rx products. In addition, film variability can make it difficult to automate control of package net contents. X-ray technology offers the ability to ignore the pouch material and focus on the net content’s mass, thus providing the additional safety check on dosage.
Costs and Concerns
With its ability to multitask, x-ray detection equipment carries a premium. A standard pharma device will run $65-85,000, compared to a traditional coil detector, which costs in the neighborhood of $20,000. Maintenance expenses are greater as well, Leonard notes, as tubes burn out, are fairly expensive, and must be replaced by a certified technician employed by the vendor.
Manufacturers who use x-ray technology are also subject to additional regulation. Most states have fairly rigid laws regarding the purchase and operation of x-ray equipment, Leonard notes. While pharmaceutical inspection x-rays generate power that is negligible in comparison to the machines used by hospitals and clinics, they are nevertheless usually subject to the same regulations. Georgia, for instance, requires a fair amount of paperwork upon purchase of the equipment, Leonard says, and asks that manufacturers keep records of regular maintenance and testing to show that radiation levels do not exceed what is acceptable.
It’s a training issue as well. Line operators were wary when Leonard introduced them to the new equipment, but were reassured when they learned that the radiation levels were not significant, Leonard says.
On the tabletting lines, product is inspected prior to bottling and thus traditional metal detectors have proven effective and more practical. Pharma Tech has models from different vendors in operation—having acquired them over the years to meet different customer requirements. They have proven very good for ferrous, non-ferrous and stainless steel material detection, says Leonard.
PharmaManufacturing.com is the site for knowledge, news and analysis for manufacturing and other professionals working in the pharmaceutical, biopharmaceutical and biotech industries.